XAVAX 112270 LED Filament, E14 replaces 40W candle bulb, warm white, dimmable
More product information
- Particularly energy-efficient light bulb, uses only 4.5 watts of electricity
- With its special LED strips, the lamp offers the light characteristics of a conventional incandescent lamp
- Decorative candle shape with full-glass housing
- Dimmable
- Pleasant warm white light colour for general lighting tasks
- For indoor and outdoor applications
What's in the Box
- 1 LED filament
Technical Specs
| Can be Dimmed | Yes |
| Colour Temperature | 2700 |
| Cooling Element/Housing | Glass |
| Design | C 35 |
| Lamp Survival Factor at 6000h (min.) | 0.9 |
| LED Type | Filament |
| Light color / color temperature | Warm White - 2700 K |
| Nominal Service Life | 15000 h |
| Number of LEDs | 4 |
| Number of Switching Cycles until Premature Failure (min.) | 100000 |
| Operating Position | 360 ° |
| Optimal Ambient Temperature | 25 °C |
| Power Consumption of an Equivalent Incandescent Lamp | 40 W |
| RA-Value | 80 |
| Socket | E 14 |
| Starting Time (max.) | 0.5 s |
| Diameter | 35 mm |
| Height | 118 mm |
| Net Weight | 30 gr |
| Energy Efficiency Class | A++ (Scale from A++ to E, Optimum Value: A++) |
| Energy Savings Compared with an Equivalent Incandescent Bulb | 88 % |
| Lamp Current | 24 mA |
| Lamp Lumen Factor at End of Nominal Service Life (min.) | 0.700 |
| Rated Power Consumption | 4.5 W |
| Rated Service Life | 15000 h |
| Colour Consistency | 2.3 |
| EAR Reg.No. | DE 38720470 |
| Electrical Efficiency Factor of the Bulb (min.) | 0.824 |
| Lamp Lumen Maintenance Factor at 6000h | 0.9 |
| Mains Frequency | 50 Hz |
| Nominal Beam Angle | 330 ° |
| Nominal Light Output | 470 lm |
| Nominal Power Consumption | 4.5 W |
| Operating Voltage | 230 V |
| Premature Failure Rate | 0 % |
| Rated Beam Angle | 330 ° |
| Rated Light Output | 470 Im |
| Start-Up Time Until 95% of Full Light Output Has Been Reached (max.) | 1 s |
| Weighted Energy Consumption | 5 kWh/1000h |
| Colour Reproduction Index RA (min.) | 80 |
| LED Brand | Epistar |
| Light Colour | Warm White |
| Product Division | Home & Living |
| Bulb Serves as Replacement for Standard Bulbs of This Size | Candle |
| Suitable for Accent Lighting | No - Beam Angle between 120° and 360° (Φuse) |
| Recommendations for Recycling | Recycling Depot or Collection Point |
Note for Consumers
This LED bulb is designed for use in open fixtures. The heat produced during operation can thus be given off to the environment. The prognosticated service life refers to use in open fixtures. The bulb's service life is reduced if it is used in closed fixtures (insufficient cooling). Only use in appropriate fixtures. When replacing the bulb, it must be allowed to completely cool off and the mains voltage has to be switched off. Exchange damaged bulbs straightaway. No liability for improper use.
Among the huge number of different dimmers there may be some which impede the function of bulbs (flickering, noise).
Mixed operation, i.e. simultaneous use of LED bulbs and standard bulbs or different types of LED bulbs in one dimmer lead is not possible. Noise in dimmers that has not been noticed while using incandescent lamps: dimmer is not suitable for LED bulbs.
Corded dimmers (dimmer built in power cord) need a separate on/off switch as they may not be able to regulate to 0.
Please observe the minimum load of the dimmer, otherwise it may not start or control falsely. Simple dimmers mostly function from 60W to 400W.
The fundamental brightness of built-in dimmers must be set at a high enough level, otherwise the LED bulb may not be switched on.
Change the dimmer setting slowly and not suddenly or too fast.
Only use dimmers for incandescent lamps, no dimmers for transformers, etc.
Touch dimmers are mostly not suitable. A wrong dimmer can cause permanent damage to the bulb.
